09-04-2012 08:13 AM - edited 03-04-2019 05:28 PM
What commands do I need to enter to correctly authenticate with my DSL PPPOE provider? I need to have the ID and Password entered into the router.
Thanks
mtnvictory69
09-04-2012 03:08 PM
Michael,
I need to see your complete configuration now. Thank you!
Regarding the DNS, try adding the command ppp ipcp dns request accept to the Dialer1 interface. Then shutdown the interface using the shutdown command, wait a few seconds and reactivate it again using the no shutdown command. Then ask your PC to release and renew its IP address from the DHCP server. Hopefully, the DNS server should now be passed to your PC.
By the way, can you ping a public address, say, 8.8.8.8 from the router? Can you also ping it from a PC inside your network?
Best regards,
Peter
09-05-2012 11:05 PM
Michael,
Any news after adding the suggested ppp ipcp dns request accept command to your Di1 interface?
Best regards,
Peter
09-06-2012 11:38 AM
None we are taking a different route now, thank you so much for you help.
Thanks
Michael
09-06-2012 03:41 PM
Hi Michael,
I understand. It's sad we haven't been able to finish the configuration fully. We were very close to have your router completely configured and working, just a few more turnarounds were necessary... but I guess it does not matter anymore, as you chose to take a different approach.
Still, thank you for asking and for patience with my suggestions.
Best regards,
Peter
09-04-2012 11:27 AM
Also I am supposed to use the dedicated IP's that i received from the ISP they are
User-assignable 70.58.191.193
User-assignable 70.58.191.194
User-assignable 70.58.191.195
User-assignable 70.58.191.196
User-assignable 70.58.191.197
Reserved Gateway 70.58.191.198
InternetSubnetMask=255.255.255.248
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide