Cisco 1841 adsl configuration guide

[twarsal01]

Hi Geeks,

I have this question. I need steps on how to configure a cisco 1841 to allow my LAN (including firewall) to access the internet.

I have this interfaces:  ATM0/0/0 , ATM0/1/0,  fa0/0 and fa0/1. We need a ppp connection and I have my username and password from our ISP.

Does any body have any simple and smiler configuration advise that should help.

Thank you

[Mark Malone · Accepted solution]

Hi

these guides have the basic configuration for what you need to get up an running ,pppoa or pppoe depending what service your isp is giving you , follow them and you should be able to configure the router  easily

http://www.cisco.com/c/en/us/support/docs/long-reach-ethernet-lre-digital-subscriber-line-xdsl/asymmetric-digital-subscriber-line-adsl/71109-adslguide-pppoa-opt1.html

http://www.cisco.com/c/en/us/support/docs/long-reach-ethernet-lre-digital-subscriber-line-xdsl/asymmetric-digital-subscriber-line-adsl/71118-adslguide-pppoe-dynmc.html