I brought 2 cisco 2620 routers and only one worked properly the other displayed some unknown charecters in hyper terminal. Some friend of mine told me to try a bit rate other than 9600 so i did that and the router booted into rommon mode then he said the IOS is missing on the router
so i thought to copy the IOS from the working router to the non working router using a tftp server. Some how i did copy the IOS from the working router and then copied it into the non working router using xmodem. I have only once copied an IOS through a TFTP server so i referred to a youtube tutorial. The process worked alright and then suddenly it gave a blue screen of death and after my pc restarted i switched off the working router and switched it back on and then it gave an error message and it didn't work.
I think the router IOS is corrupted
If anyone can help me it will be a great help as i need urgent help because i'm studying for my CCNA exam
Does anyone have or know of any Powershell scripts to collect information from Cisco switches (Nexus, layer 2) and output to csv or Excel? Need to document a number of Cisco switches with port, vlan, routes, ACL information. Thanks
Community Live- Basic Wireshark for Networking Students
(Live event - formerly known as Webcast- Tuesday 14 April, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Tuesday 14th, April 2020 at 10hrs PDT
Cisco IOS-XE 17.2.1 – Catalyst Switching Updates
Cisco has announced the availability of the latest IOS-XE release - IOS-XE Amsterdam 17.2. This release IOS-XE 17.2 is the next Standard Maintenance Release after 17.1 which also has a sustaining lifetime o...
In this article, we are going to talk about Cisco Umbrella Initial Setup.- The continuity of IT is the basis of today’s business environment. Almost every single decision made by business is either based on an IT data or done using the IT platform. And so...