06-15-2016 03:56 PM - edited 03-05-2019 04:14 AM
Hello,
I have a Cisco 3220 and it has multiple interface cards (Ethernet and Serial). I removed the serial interface on this router, but the router keeps rebooting. Is it possible to the remove the serial interface card on the router?
Thanks
Cuong Tran
06-17-2016 10:54 PM
It looks like it is removable to me. You'll have to watch the console output to see why it says it is rebooting.
06-19-2016 03:23 PM
Hello Philip,
I look through the console output, but unable to decode the error messages.
Here are the error messages:
* the following cards are missing *-000113%SYS-6-LOGGERSTART: Logger process started
* 3220SMIC *0:00 crashinfo_20020301-000507ial2/0, changed state to adm
* * Mar 01 2002 00:02:13 +00:00 crashinfo_20020301-000213:22.391: %LINK-5-
* To correct the problem power down the router and install the *x 263599 Mar 01 2002 00:02:30 +00:00 crashinfo_20020301-000230tiv
* missing cards in the router. *nte
11 -rwx 259038 Mar 01 2002 00:00:13 +00:00 crashinfo_2002
* *
12 -rwx 298156 Mar 01 2002 00:00:17 +00:00
* For more information, please contact your vendor *
%Software-forced reload
15 -rwx 280
Unexpected exception to CPUvector 700, PC = 0x80233F64, LR = 0x80233F18 restarted --
16
-Traceback= 80233F64 80233F18 80144EE4 801450E8 80D67F04 804337D0 80433A1C 80235
17 -r
D5C 8023A7240 Mar 01 20
CPU Register Context:shinfo_20020301-00010
MSR = 0x00029032 CR = 0x22002024 CTR = 0x8014C94C XER = 0x00000000port: h
18 -rwx 337295 Mar 01 2002 00:01:28 +00:00 crashinfo_
R0 = 0x80233F18 R1 = 0x81FC2608 R2 = 0xFFF4FFF4 R3 = 0x81DFC28C
R12 = 0x82008022 R13 = 0x87FFFF0C R14 = 0x804339B0 R15 = 0x00000000ged state to up
access-profile Apply user-profile to in
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000te Create a temporary Access-List entry
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x81FC2628 R23 = 0x81FC27B8
router1#wr
bfe For manual emergency mo
R24 = 0x00000000 R25 = 0x00000001 R26 = 0x00000000 R27 = 0x00000001 Change current directory marker.
R28 = 0x22008022 R29 = 0x00000000 R30 = 0x00000000 R31 = 0x00000000 I
clock Manage the system clo
*Mar 1 00:00:04.543: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console don related commands.
adjacency Adjacent nodes
debug
ebugging output.functions (see a
*Mar 1 00:00:03.415: %MIC-7-ADD_SERIAL_NUM: Added serial number in position 0te Delete a fileShow alignment information
dir
*Mar 1 00:00:03.415: %MIC-7-AUTHENTICATE_PASS: Device ID #16 authenticatedCPU R Turn off privileged commands
egister Context:t Disconne
R12 = 0x82008022 R13 = 0x87FFFF0C R14 = 0x804339B0 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x81FC2628 R23 = 0x81FC27B8
R24 = 0x00000000 R25 = 0x00000001 R26 = 0x00000000 R27 = 0x00000001
R28 = 0x22008022 R29 = 0x00000000 R30 = 0x00000000 R31 = 0x00000000
DEC = 0x7FFFE6F9 TBU = 0x00000000 TBL = 0x05CBAB71 PVR = 0x80811014
DAR = 0x00000000 DSISR = 0x000000þ
*** System received a Software forced crash ***
signal= 0x17, code= 0x700, context= 0x81dc0698
PC = 0x80233f64, Vector = 0x700, SP = 0x81fc2608
System Bootstrap, Version 12.3(2r)XA, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
===============================================
Thanks
Cuong
06-19-2016 03:28 PM
It is very unhappy!
Try removing the config for the serial interfaces first, and then remove the card.
That software is also pretty old. If you have access you could try a newer version of the code.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide