11-04-2012 09:41 AM - edited 03-04-2019 06:02 PM
We have a Cisco 4506 with Supervisor 6-E. We plan on replacing the existing 4 line cards with
WS-X4548-GB-RJ45V | 48 port 10/100/1000 BaseT with IEEE 802.3af PoE |
to support Cisco 7945G IP phones. We currently have 1000W power supply.
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-1000AC AC 1000W good good n.a.
PS2 PWR-C45-1000AC AC 1000W good good n.a.
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
---------------------- ---- ---------
System Power (12V) 430 1050
Inline Power (-50V) 0 0
Backplane Power (3.3V) 0 40
---------------------- ---- ---------
Total 430 1090
What is the recommended power supply for this configuration?
Should we go with 110V or 220V is a discussion point?
11-04-2012 01:34 PM
11-04-2012 03:23 PM
Yes, I have used Cisco Power Calculator, it's recommending 6000W which I think is not right.
DC-SW#sh module
Chassis Type : WS-C4506
Power consumed by backplane : 0 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 6 Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E JAE1535038X
2 6 1000BaseX (GBIC) WS-X4306-GB JAE08522VVM
3 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE162700ZK
4 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE162203SK
5 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE162203WI
6 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V JAE162700IZ
11-05-2012 02:20 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide