08-23-2012 01:49 PM - edited 03-04-2019 05:21 PM
Hi,
i bought new RF Cisco 7204VXR NPE-G1.
As soon i enable OC3 module ( PA-POS-OC3SMI) CPU of the router shoot to 100%, and if i reboot the router, it wont comeback not even on Console.
I had to remove the POS card and then boot router and then hot insert the module.
so i put the command
int pos 4/0
loopback internal
as soon igave this command, CPU dropped down to normal.
Whats the deal here? now i need to activate the circuit on this POS interface, but as soon i remove loopback internal command , CPU shoots to 100%
Although CPU sorted dont show any process causing it.
any idea?
9999999999999999999999999999999999999999999999999999999999
5555533333111114444444444777774444466666777775555566666444
100 ***** ***** ********************
90 ************************************************************
80 ************************************************************
70 ************************************************************
60 ************************************************************
50 ************************************************************
40 ************************************************************
30 ************************************************************
20 ************************************************************
10 ************************************************************
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per second (last 60 seconds)
CPU utilization for five seconds: 95%/96%; one minute: 95%; five minutes: 79%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
120 460 2738070 0 0.16% 0.19% 0.17% 0 RBSCP Background
2 14840 54802 270 0.08% 0.03% 0.01% 0 Load Meter
216 1008 275696 3 0.08% 0.02% 0.00% 0 NTP
107 14252 547872 26 0.08% 0.10% 0.11% 0 DHCPD Receive
212 1104 17867 61 0.08% 0.01% 0.00% 0 PDU DISPATCHER
211 3568 35725 99 0.08% 0.03% 0.00% 0 IP SNMP
56 76 274011 0 0.08% 0.00% 0.00% 0 ISA Common Helpe
207 716 2738358 0 0.08% 0.12% 0.13% 0 CCPROXY_CT
93 60 273936 0 0.08% 0.01% 0.00% 0 Socket Timers
40 772 275060 2 0.08% 0.04% 0.02% 0 Per-Second Jobs
104 120 273967 0 0.08% 0.01% 0.00% 0 RUDPV1 Main Proc
68 16716 135866 123 0.08% 0.18% 0.10% 0 IP Input
12 20 273971 0 0.00% 0.00% 0.00% 0 IPC Periodic Tim
14 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager
13 44 273971 0 0.00% 0.00% 0.00% 0 IPC Deferred Por
11 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager
17 0 1 0 0.00% 0.00% 0.00% 0 OIR Handler
18 0 1 0 0.00% 0.00% 0.00% 0 Crash writer
10 0 4568 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach
15 0 1 0 0.00% 0.00% 0.00% 0 IPC BackPressure
9 4 2 2000 0.00% 0.00% 0.00% 0 ATM VC Auto Crea
22 0 1 0 0.00% 0.00% 0.00% 0 AAA_SERVER_DEADT
16 171340 274564 624 0.00% 0.00% 0.00% 0 EnvMon
19 5476 66968 81 0.00% 0.01% 0.00% 0 ARP Input
25 40 4 10000 0.00% 0.00% 0.00% 0 Entity MIB API
26 28 37 756 0.00% 0.00% 0.00% 0 EEM ED Syslog
27 92 68502 1 0.00% 0.00% 0.00% 0 HC Counter Timer
28 0 2 0 0.00% 0.00% 0.00% 0 Serial Backgroun
20 0 2 0 0.00% 0.00% 0.00% 0 ATM Idle Timer
30 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers
31 0 1 0 0.00% 0.00% 0.00% 0 RMI RM Notify Wa
21 4 2 2000 0.00% 0.00% 0.00% 0 AAA high-capacit
23 4 1 4000 0.00% 0.00% 0.00% 0 Policy Manager
34 0 1 0 0.00% 0.00% 0.00% 0 SERIAL A'detect
35 0 2 0 0.00% 0.00% 0.00% 0 XML Proxy Client
08-23-2012 01:54 PM
ok issue resolved:)
i need to add this command under POS interface
pos scramble-atm
thank you for viewing this thread
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide