I have strange issue with 7507. I have added a new GEIP controller into it.
By adding this GEIP controller the CPU usage has been increased up to 20%.
The strange thing is that CPU usage is always normal + 20% and there is no traffic on this interface ( even if interface is shutdown the usage remains same ). And if there is traffic it's same J
I can't see the process taking this high CPU utilization if I look into CPU usage stats.
What the heck has happened to this? J
Here are CPU stats:
Router# #show proc cpu | excl 0.00%__0.00%__0.00%
CPU utilization for five seconds: 15%/13%; one minute: 15%; five minutes:
13%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
5 518320 41974 12348 0.00% 0.11% 0.11% 0 Check heaps
20 66004 924869 71 0.08% 0.01% 0.00% 0 IPC Seat
Manager
22 204088 1466063 139 0.00% 0.03% 0.02% 0 ARP Input
31 7080 1609 4400 0.98% 1.44% 0.59% 2 Virtual Exec
52 117672 5843 20138 0.00% 0.02% 0.00% 0 Per-minute
Jobs
73 3586004 17990635 199 0.82% 0.60% 0.49% 0 IP Input
189 38964 213398 182 0.00% 0.01% 0.00% 0 IP SNMP
191 56184 104952 535 0.00% 0.01% 0.00% 0 SNMP ENGINE
196 160560 1397067 114 0.08% 0.01% 0.00% 0 BGP Router
197 49200 250208 196 0.00% 0.01% 0.00% 0 BGP I/O
IOS version:
IOS Version 12.4(3a)
Controller
Router# sh ver | inc GEIP
1 GEIP controller (1 GigabitEthernet).
1 GEIP controller (1 GigabitEthernet)
