03-12-2014 05:53 AM - edited 03-04-2019 10:33 PM
Hi, I have a cisco 819-4g, I config with single sim, but, when I insert a second sim, and tray to create profile 2 for cellular 0 it say
Profile 2 NOT written to modem
and, I cant find this command
router(config-controller)# lte sim primary slot 0
router(config-controller)# lte sim profile 2 slot 0
in my router isn't this, ther is only
router(config-controller)# lte sim authenticate
Router#sh version
Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 20-Jun-13 16:14 by prod_rel_team
ROM: System Bootstrap, Version 15.2(2r)T, RELEASE SOFTWARE (fc1)
Router uptime is 1 hour, 4 minutes
System returned to ROM by power-on
System image file is "flash:c800-universalk9-mz.SPA.152-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco C819G-4G-G-K9 (revision 6.0) with 883788K/33715K bytes of memory.
Processor board ID FCZ1747C2K3
4 FastEthernet interfaces
1 Gigabit Ethernet interface
1 Serial(sync/async) interface
2 terminal lines
1 Virtual Private Network (VPN) Module
1 Cellular interface
1 cisco Embedded AP (s)
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
1000944K bytes of ATA System CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C819G-4G-G-K9 FCZ1747C2K3
License Information for 'c800'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
Please help me understand what I do wrong.
Thanks.
03-13-2014 01:16 AM
Can somebody help me on this official forum?
06-09-2014 07:48 AM
Any news on this? I have the same issue. Please see my output:
Router(config-controller)#lte sim ?
authenticate CHV1 authentication
The show version output is as follows:
Router#show version
Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 20-Jun-13 16:14 by prod_rel_team
ROM: System Bootstrap, Version 15.2(2r)T, RELEASE SOFTWARE (fc1)
Router uptime is 4 hours, 47 minutes
System returned to ROM by power-on
System image file is "flash:c800-universalk9-mz.SPA.152-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco C819G-4G-G-K9 (revision 6.0) with 883788K/33715K bytes of memory.
Processor board ID FCZ1815C4U7
4 FastEthernet interfaces
1 Gigabit Ethernet interface
1 Serial(sync/async) interface
2 terminal lines
1 Virtual Private Network (VPN) Module
1 Cellular interface
1 cisco Embedded AP (s)
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
999936K bytes of ATA System CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C819G-4G-G-K9 FCZxxxxxx
License Information for 'c800'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
Configuration register is 0x2102
Regards
Anthony
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide