cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1923
Views
0
Helpful
2
Replies

Cisco 819G issues with Cellular o Profile 1 ( default profile )

plussier1
Level 1
Level 1

Hi,

After i deleted default profile 1 with the command bellow, look like that some thing doesn't work.

Now i not be able to recreate the profile or create a new one with the same APN

Look like that some thing doesn't work.

Is the only way to correct that is to reboot the router ?

cellulao o lte profile delete 1

spoke-5_St-Bruno#show cellular 0 profile 1

Profile 1 = UNDEFINED* **
--------
PDP Type = IPv4
Access Point Name (APN) = staticipeast.telus.com
Authentication = None

 * - Default profile

Let me know

Thank You !

2 Replies 2

Hello,

does a shut/no shut of cellular 0 interface make a difference ?

I already tried and change nothing.

See the message bellow and part of my actual config. everything was working before I deleted the profile 1 to recreate it to do a test.

Now profile 1 = UNDEFINED   ( Usualy it display ACTIVE or INACTIVE )

I Tried to recreate it with the command

spoke-5_St-Bruno#cellular 0 lte profile create 1 staticipeast.telus.com

But Still Profile 1 = UNDEFINED

spoke-5_St-Bruno#show cellular 0 profile 1

Profile 1 = UNDEFINED* **
--------
PDP Type = IPv4
Access Point Name (APN) = staticipeast.telus.com
Authentication = None

 * - Default profile

Part of the Router configuration

--------------------------------------------------------------------------------

chat-script lte "" "AT!CALL" TIMEOUT 20 "OK"

---------------------------------------------------------------------------------

controller Cellular 0
 lte modem link-recovery rssi onset-threshold -110
 lte modem link-recovery monitor-timer 20
 lte modem link-recovery wait-timer 10
 lte modem link-recovery debounce-count 6

---------------------------------------------------------------------------------

interface Cellular0
 ip address negotiated
 ip nat outside
 ip virtual-reassembly in
 encapsulation slip
 dialer in-band
 dialer string lte
 dialer watch-group 2
 async mode interactive
 crypto map xxxxxx

------------------------------------------------------------

dialer watch-list 2 ip 5.6.7.8 0.0.0.0
dialer watch-list 2 delay route-check initial 60
dialer watch-list 2 delay connect 1

Review Cisco Networking for a $25 gift card