When I connect the adsl cable, the CD led gives no signal.
The RX/TX led's are flashing very fast.
When I do a 'debug atm events', I get :
Router#debug atm events
ATM events debugging is on
Router#
00:18:53: DSL: 20: Modem state = 0x8
00:18:56: DSL: Could not establish connection
00:18:59: DSL: Trying to bring up DSL line using Embedded firmware version : 3.9
.19
00:18:59: DSL: Send ADSL_OPEN command.
00:18:59: DSL: Using subfunction 0x2
00:18:59: DSL: Using subfunction 0x2
00:18:59: LOCAL:Max noise margin for power cutoff 31
00:18:59: DSL: Sent command 0x3
00:19:02: DSL: 1: Modem state = 0x8
00:19:04: DSL: 2: Modem state = 0x8
00:19:07: DSL: 3: Modem state = 0x8
00:19:09: DSL: 4: Modem state = 0x8
00:19:12: DSL: 5: Modem state = 0x8
00:19:14: DSL: 6: Modem state = 0x8
And the ATM interface is down.
No administrative down, but just down.
I can't get it up.
