12-09-2014 01:45 PM - edited 03-05-2019 12:19 AM
Hello All,
Just a quick question for a cisco newbie.
I'm having trouble using a 867VAE-K9 to connect to the NBN in Australia.
Is it compatible?
Appreciate any help.
Regards,
Leonard
12-09-2014 02:24 PM
I'm having trouble using a 867VAE-K9 to connect to the NBN in Australia.
I've got NBN and I'm using an 881 and with Internode.
The NBN port directly connects to my GigabitEthernet port marked "WAN".
Bear in mind that the 860-series router is "rated" to push up to 12.80 Mbps (one-way traffic and no encryption).
12-09-2014 02:28 PM
Thanks Leo.
So based on this, and note that I'm new to the cisco versions/models, this should be the same for the 867VAE?
Mine doesn't work with the GigaBit port GE1 (WAN).
Regards,
Leonard
12-09-2014 02:51 PM
Leonard,
I'm not familiar with the 867 but does the router have a GigabitEthernet (yellow colour) and marked as "WAN"?
12-09-2014 02:58 PM
Hi Leo,
All the ports are yellow and the GigaBitEthernet1 is marked as WAN.
Regards,
Leonard
12-09-2014 04:49 PM
All the ports are yellow and the GigaBitEthernet1 is marked as WAN.
Then directly connect the NBN "box" directly to this port and pour all the ATM configuration into this port.
What speed is your DSL speed?
12-09-2014 05:20 PM
Doesn't work unfortunately. NBN speed is 25mbps. not ADSL.
12-09-2014 06:33 PM
NBN speed is 25mbps
Cisco 860 is NOT designed to push that much WAN speed.
not ADSL.
Configuration is the same. It's just moving to a different port on the router (and different cable).
12-09-2014 06:41 PM
Ok thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide