Hi, I have the following config, I am trying to put the cisco 877 in bridge mode and let the device attached to the switchport handle all the negotiation and receive the public ip address, but for some reason this is not working, am I missing something ?
Thanks in advance...
Building configuration...
Current configuration : 877 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
no ip routing
no ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
interface ATM0
no ip address
no ip route-cache
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5snap
!
dsl operating-mode auto
bridge-group 1
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
no ip address
no ip route-cache
bridge-group 1
!
!
!
no ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
bridge 1 protocol ieee
!
line con 0
no modem enable
line aux 0
line vty 0 4
!
scheduler max-task-time 5000
!
webvpn context Default_context
ssl authenticate verify all
!
no inservice
!
end
Router#
