Cisco 881 router is not supporting bgp

[noumanqazi]

I have cisco 881 ISR router  with c880data-universalk9-mz.124-24.T4.bin.

When I try to run bgp it is showing error . and showing other protocols but not bgp.

How can I enable support for bgp in this router

thanks

Nouman

[Jennifer Halim]

Looks like you might have been running "Advanced Security" feature sets, instead of "Advanced IP Services".

To run BGP, you would need to run "Advanced IP Services" feature set software for 881 router.

Hope that answers your question.

[noumanqazi]

Thanks for the reply;

As Per Cisco IOS software advisor ; the following is IP advance service IOS;

12.4(24)T3 c880data-universalk9-mz.12.4-24.T3

and I download the same train i.e

c880data-universalk9-mz.124-24.T4.bin.

Can you please advise which software will work for me.

Thanks

Nouman

[noumanqazi]

Please also find show version from router.

[Jennifer Halim]

Pls kindly post the output of "show version"

[Jennifer Halim · Accepted solution]

You would need to have CISCO881-SEC-K9, currently you only have CISCO881-K9.

You would need to purchase the software upgrade to upgrade your router to Advanced IP Services.

Here is the data sheet for your reference:

http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78_459542.html

Here is the part# for the upgrade:

SL-880-AIS (upgrade option)

Cisco 880 Advanced IP Services Image Feature License

[noumanqazi]

yourname>show version
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 12.4(24)T4,
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 03-Sep-10 15:45 by prod_rel_team

ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)

yourname uptime is 21 hours, 7 minutes
System returned to ROM by reload at 10:25:28 UTC Sat Oct 9 2010
System image file is "flash:c880data-universalk9-mz.124-24.T4.bin"
Last reload reason: Reload Command

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 881 (MPC8300) processor (revision 1.0) with 249856K/12288K bytes of memory
.
Processor board ID FCZ1425922N

5 FastEthernet interfaces
256K bytes of non-volatile configuration memory.
126000K bytes of ATA CompactFlash (Read/Write)

License Information for 'c880-data'
    License Level: advsecurity   Type: Permanent
    Next reboot license Level: advsecurity

Configuration register is 0x2102

[rsachin574]

use this command in config mode license boot module c880-data level advipservices and after saving the configuration reload the router.