cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
609
Views
0
Helpful
1
Replies

cisco 881 whose fast 4 is in trouble after license update

archibaldnate
Level 1
Level 1

Cisco 881 with ios c880data-universalk9-mz.150-1.M4.bin whose fast 4 got troubles after license update. It's connected to a cisco 2800 and while previously was working fine forced to 100Mb full-duplex, now we must keep it auto-duples and in this way it often bounces.

License seems to be good.

Unsuccessfully replaced the Lan cable between the 2 routers.

router#sh license

Index 1 Feature: advipservices                 

        Period left: 624 weeks 6  days

        Period Used: 8  hours 56 minutes

        License Type: Evaluation

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Low

Index 2 Feature: advsecurity                   

        Period left: Life time

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

Index 3 Feature: ios-ips-update                

        Period Used: 0  minute  0  second 

        License Type: Evaluation

        Start Date:         N/A, End Date: Dec 31 2025

        License State: Not in Use, EULA not accepted

        License Count: Non-Counted

        License Priority: None

Index 4 Feature: SSL_VPN                       

        Period left: Not Activated

        Period Used: 0  minute  0  second 

        License Type: Evaluation

        License State: Not in Use, EULA not accepted

        License Count: 100/0/0  (Active/In-use/Violation)

        License Priority: None

router#sh license feature

Feature name             Enforcement  Evaluation  Subscription   Enabled

advipservices            yes          yes         no             yes 

advsecurity              no           no          no             no  

ios-ips-update           yes          yes         yes            no  

SSL_VPN                  yes          yes         no             no  

1 Reply 1

archibaldnate
Level 1
Level 1

Connection is now up and I don't know why! Fast 4 was set as duplex auto and strangely it wasn't working. I reconfigured full duplex and this time it started working!