09-23-2011 01:50 AM - edited 03-04-2019 01:42 PM
Cisco 881 with ios c880data-universalk9-mz.150-1.M4.bin whose fast 4 got troubles after license update. It's connected to a cisco 2800 and while previously was working fine forced to 100Mb full-duplex, now we must keep it auto-duples and in this way it often bounces.
License seems to be good.
Unsuccessfully replaced the Lan cable between the 2 routers.
router#sh license
Index 1 Feature: advipservices
Period left: 624 weeks 6 days
Period Used: 8 hours 56 minutes
License Type: Evaluation
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
Index 2 Feature: advsecurity
Period left: Life time
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
Index 3 Feature: ios-ips-update
Period Used: 0 minute 0 second
License Type: Evaluation
Start Date: N/A, End Date: Dec 31 2025
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: SSL_VPN
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: Evaluation
License State: Not in Use, EULA not accepted
License Count: 100/0/0 (Active/In-use/Violation)
License Priority: None
router#sh license feature
Feature name Enforcement Evaluation Subscription Enabled
advipservices yes yes no yes
advsecurity no no no no
ios-ips-update yes yes yes no
SSL_VPN yes yes no no
09-23-2011 05:23 AM
Connection is now up and I don't know why! Fast 4 was set as duplex auto and strangely it wasn't working. I reconfigured full duplex and this time it started working!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide