cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
528
Views
0
Helpful
3
Replies

Cisco ASR 1004 - Upgrade IOS

Hello all,

I have Cisco ASR 1004 and i would upgrade IOS. Can I follow standard procedure (download IOS, change bootvar and reload)? Or I have to enable sso redundancy?

 

Thanks in advance

3 Replies 3

Bilal Nawaz
VIP Alumni
VIP Alumni

You can follow standard procedure with a reload.

Please rate useful posts & remember to mark any solved questions as answered. Thank you.

Thanks Bilal. I will let you know.

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Yes, you might be able to follow typical router IOS upgrade procedures, but with the ASR series, you might check whether the IOS has been split into components (or whether you wish to do so).  Component based IOS implementations add a new step to the process.

Review Cisco Networking for a $25 gift card