cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1350
Views
5
Helpful
2
Replies

Cisco ASR (ISG functions) and SNMP

Hi,

 

ASR 1002-X (IOS XE) routers for create internet access. I need to have clean the user's session on SNMP (from CLI command this: "clear ip subscriber session uid xxx").

 

On Cisco WEB-site I see CISCO-SUBSCRIBER-SESSION-MIB for this operations (ftp://ftp.cisco.com/pub/mibs/v2/CISCO-SUBSCRIBER-SESSION-MIB.my). 

 

With use of this MIB I have READ-ONLY (snmpwalk) information on sessions and services from ISG, I cannot WRITE (snmpset) parameters (clear session for example). 

 

As with the help of SNMP and this MIB I can make clear subscriber session?

 

Thanks.

2 REPLIES 2
pieterh
VIP Collaborator

I'm not sure but maybe you can not clear individual session, only clear all sessions

 

pieterh
VIP Collaborator

this matches your question better

 

https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=csubJobEntry#oidContent

when you hover over "object details" you will read you most create a job type : "subscriber session query"

probably that is the read-only result what you've allready got?

and then perform another job with type "subscriber session clear"