cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
300
Views
0
Helpful
0
Replies
Beginner

Cisco ASR1004 bvi and bridge-group missing in ATM port

Hi,

   I tried to use bvi interface on ASR 1004 but it wasn't successfull..

my company use cisco7206 now, will changed ASR1004 , but in ASR1004 these commond missing.

i heard asr 1000 series does not support bvi interfaces,can use bdi?

who can tell me , how it is use this bdi in ATM port or bvi config in ASR 1004

i used ios code:

asr1000rp1-adventerprisek9.03.07.03.S.152-4.S3.bin

commond:

bridge irb

bridge 1 route ip

bridge 1 protocol ?

1111(config)#bridge 1 protocol ?

  dec          DEC protocol

  ibm          IBM protocol

  vlan-bridge  vlan-bridge protocol

not ieee

interface ATM1/0/0

no ip address

ip directed-broadcast

no ip route-cache cef

load-interval 30

no atm ilmi-keepalive

no shut

!

interface ATM1/0/0.1 point-to-point

mtu 1500

bandwidth 6000

no ip redirects

no ip unreachables

no ip proxy-arp

ip accounting output-packets

bridge-group 3                       //can't config

pvc SSS 0/105

  protocol ip 192.168.1.2 broadcast

  ubr 6000

  encapsulation aal5snap

no shut

!

interface BVI3                              //this interface bvi can't config

description << To sss >>

mtu 1500

bandwidth 6000

ip address 192.168.1.1 255.255.255.0

no ip redirects

no ip unreachables

no ip proxy-arp

ip tcp adjust-mss 1300

load-interval 30

no shut

plz,help

thanks

Everyone's tags (4)
CreatePlease to create content