cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
595
Views
3
Helpful
4
Replies

Cisco C8300-2N2S-6T

Robert Plunkett
Level 1
Level 1

Good evening, I installed a C-NIM-4X card into a Cisco C8300-2N2S-6T router, when I looked at the status is said "booting" and I can't access it.

Can someone help with getting this card becoming active please?

4 Replies 4

marce1000
VIP
VIP

 

  - Attach a console to the router and scrutinize the complete boot process ?
 - https://www.cisco.com/c/en/us/products/collateral/routers/catalyst-8300-series-edge-platforms/catalyst-8000-series-gigabit-ethernet-lan-wan-modules-ds.html , look at Table 4 and report back
 

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Thank you Marce 1000, I tried another module out of the box, and even on a different router, and they both produced the same result.

 

 

                         - Take care as  other posted , to install the minimum IOS version required , 17.11.1
 Ref : https://www.cisco.com/c/en/us/products/collateral/routers/catalyst-8300-series-edge-platforms/catalyst-8000-series-gigabit-ethernet-lan-wan-modules-ds.html    Table 1
>...

Min. required IOS Version

17.11.1

17.11.1

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

liviu.gheorghe
Spotlight
Spotlight

Minimum required IOS version: 17.11.1

Regards, LG
*** Please Rate All Helpful Responses ***
Review Cisco Networking for a $25 gift card