cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
235
Views
0
Helpful
1
Replies

Cisco ESS-3300-NCP Firmware Upgrade

airman snuffy
Beginner
Beginner

Hello all,

I am currently working on a Cisco ESS-3300-NCP module (cisco board within a Klas Voyager ESR) running 17.02.01 Amsterdam. I am trying to upgrade it to 17.09.04. 

I used TFTP to upgrade the firmware of a Cisco 6300 (same Klas Voyager device) with the router hosting 192.168.1.0/24, router being 1.1 and computer 1.2. This worked but using the same method for the 3300 (switch hosting the local network) I receive a "socket error".

I am unsure if the 3300 works with TFTP in that way or I am doing something wrong. To note the device does not have a USB slot so I cannot use that method. Any tips, tricks or help is greatly appreciated thank you.

 

1 Reply 1

balaji.bandi
Hall of Fame
Hall of Fame

TFTP should work - to confirm your TFTP working as expected - copy from device running config to TFTP see its working.

i follow below guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/embedded/ess3300/software_config/b-cisco-embedded-services-3300-series-configuration/m-install-and-boot.html

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: