04-23-2013 03:42 AM - edited 03-04-2019 07:41 PM
Network is 10.254.0.0/16
snag.gy/3Y8aN.jpg This is the network image.
This is my subnetted connections:
I can ping R2 to R5 but not R5 to R2. I have spent about 10 hours going through my network and code to no avail. I think it is the frame relay that's causing the error but not sure.. I just checked and I think R6 and R5 are not getting their OSPF updates by trying show ip route
Here are my configs:
Im awake 28 hours and have the project due in about 30 hours. Gotta love college :/ Anyways any help would be more than amazing, plus I might be able to get some sleep then
Thanks!
Solved! Go to Solution.
04-23-2013 04:22 AM
Hi,
R1 s0/1/1 going to ISP has same IP address as R5 s/0/0.504.
Regards
Alain
Don't forget to rate helpful posts.
04-23-2013 03:48 AM
Here is the packet tracer file
04-23-2013 04:22 AM
Hi,
R1 s0/1/1 going to ISP has same IP address as R5 s/0/0.504.
Regards
Alain
Don't forget to rate helpful posts.
04-23-2013 04:43 AM
Hm it does not seem to fix it,R5 can only get to R4 and to R6 but not past R4?
04-23-2013 04:49 AM
Hi,
upload your latest PT( with this problem fixed) and post the link here.
Regards
Alain
Don't forget to rate helpful posts.
04-23-2013 05:33 AM
username R3 password CHAP
int s0/0/1
encapsulation ppp
ppp authentication chap
ip address 10.254.0.118 255.255.255.252
ip nat inside
clock rate 64000
no shutdown
exit
--------------------------------
username R1 password CHAP
int s0/0/1
encapsulation ppp
ppp authentication chap
ip address 10.254.0.118 255.255.255.252
ip nat inside
clock rate 64000
no shutdown
exit
could you help me out? im trying ppp encapsulation with chap authentication
04-23-2013 05:55 AM
Hi,
network 10.254.0.32 255.255.255.224
dns-server 8.8.8.8 I don't see any dns-server here
default-router 10.254.0.33
the excluded addresses you configured are not in the pool range !!
Regards
Alain
Don't forget to rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide