cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
319
Views
0
Helpful
6
Replies
WayneDaly9112
Beginner

Cisco Frame Relay, Ping 1 way but not the other?

Network is 10.254.0.0/16

snag.gy/3Y8aN.jpg This is the network image.

This is my subnetted connections:

http://snag.gy/BeqUK.jpg

I can ping R2 to R5 but not R5 to R2. I have spent about 10 hours going through my network and code to no avail. I think it is the frame relay that's causing the error but not sure.. I just checked and I think R6 and R5 are not getting their OSPF updates by trying show ip route

Here are my configs:

http://pastebin.com/3QpeEp23

Im awake 28 hours and have the project due in about 30 hours. Gotta love college :/ Anyways any help would be more than amazing, plus I might be able to get some sleep then

:)

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Hi,

R1 s0/1/1 going to ISP has same IP address as R5 s/0/0.504.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

6 REPLIES 6
WayneDaly9112
Beginner

Here is the packet tracer file

http://www.2shared.com/file/y2hjzKYf/WAN.html

Hi,

R1 s0/1/1 going to ISP has same IP address as R5 s/0/0.504.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

Hm it does not seem to fix it,R5 can only get to R4 and to R6 but not past R4?

Hi,

upload your latest PT( with this problem fixed) and post the link here.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

username R3 password CHAP

int s0/0/1

encapsulation ppp

ppp authentication chap

ip address 10.254.0.118 255.255.255.252

ip nat inside

clock rate 64000

no shutdown

exit

--------------------------------

username R1 password CHAP

int s0/0/1

encapsulation ppp

ppp authentication chap

ip address 10.254.0.118 255.255.255.252

ip nat inside

clock rate 64000

no shutdown

exit

could you help me out? im trying ppp encapsulation with chap authentication

Hi,

network 10.254.0.32 255.255.255.224

dns-server 8.8.8.8  I don't see any dns-server here

default-router 10.254.0.33

the excluded addresses you configured are not in the pool range !!

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.