cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6247
Views
7
Helpful
3
Replies

Cisco ISR 1100 missing Crypto isakmp commands

aastaguy
Level 1
Level 1

Hello,

 

I am trying to setup an IPSec VPN to a set of firewalls and I don't appear to have the

 isakmp

commands under crypto. I read another post that I may need a separate license, is that still the case?

 

Thanks for your help!

 

(config)#crypto ?
RSA-key-pair RSA key pair
ca Certification authority
key Long term key operations
pki Public Key components
provisioning Secure Device Provisioning
wui Crypto HTTP configuration interfaces




#show ver
Cisco IOS XE Software, Version 16.09.02
Cisco IOS Software [Fuji], ISR Software (ARMV8EB_LINUX_IOSD-UNIVERSALK9_IAS-M), Version 16.9.2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Nov-18 17:42 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

isrcl-1 uptime is 5 days, 21 hours, 31 minutes
Uptime for this control processor is 5 days, 21 hours, 33 minutes
System returned to ROM by PowerOn at 15:11:47 PDT Wed Jun 3 2020
System image file is "bootflash:c1100-universalk9_ias.16.09.02.SPA.bin"
Last reload reason: PowerOn




This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.




Suite License Information for Module:'esg'

--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 None Smart License None
securityk9
appxk9


Technology Package License Information:

-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None Smart License None
securityk9 None Smart License None
ipbase ipbasek9 Smart License ipbasek9

The current throughput level is unthrottled

Smart Licensing Status: UNREGISTERED/No Licenses in Use

cisco C1111-4PLTEEA (1RU) processor with 1453284K/6147K bytes of memory.
Processor board ID FGL2410L149
2 Virtual Ethernet interfaces
6 Gigabit Ethernet interfaces
2 Cellular interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
2863103K bytes of flash memory at bootflash:.
0K bytes of WebUI ODM Files at webui:.


1 Accepted Solution

Accepted Solutions

h.lehnigk
Level 1
Level 1

 

You must activate the right to use license and change the bootlevel with the commands:

 

license right-to-use move securityk9
conf t
license boot level securityk9
wr

reload

 

 

View solution in original post

3 Replies 3

KeithCopeland
Level 1
Level 1
securityk9 None Smart License None

Smart Licensing Status: UNREGISTERED/No Licenses in Use

 

I would address these two first. Register the device via smart licensing 

 

Also, accept the end user license

Router(config)#license accept end user agreement




and reboot

 

h.lehnigk
Level 1
Level 1

 

You must activate the right to use license and change the bootlevel with the commands:

 

license right-to-use move securityk9
conf t
license boot level securityk9
wr

reload

 

 

dcshehan
Level 1
Level 1

I could be able to use

crypto isakmp

commands on Cisco ISR 1100-4G with the following steps.

 

(config)#license accept end user agreement
#write
#reload

---After reboot---
(config)#license boot level network-advantage addon dna-advantage
#write
#reload

 

After the second reboot, you can use the

crypto isakmp

commands.

Review Cisco Networking for a $25 gift card