04-05-2022 08:11 PM
Hi everyone,
May I ask if it is ok to buy a performance license and use it on a router that has an old firmware version? We are worried if it might take effect or not.
This is the current firmware version
bootflash isr4300-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin
ISR4331 K9
Solved! Go to Solution.
04-05-2022 08:30 PM
Purchase the PAK and apply it.
04-05-2022 08:19 PM - edited 04-05-2022 08:20 PM
Post the complete output to the following commands:
04-05-2022 08:23 PM - last edited on 04-06-2022 03:25 AM by Translator
Thanks for the quick response. Kindly find the output below.
sh platform hardware throughput level
The current throughput level is 100000 kb/s
sh license feature
Feature name Enforcement Evaluation Subscription Enabled RightToUse
appxk9 yes yes no no yes
uck9 yes yes no no yes
securityk9 yes yes no yes yes
ipbasek9 no no no yes no
FoundationSuiteK9 yes yes no no yes
AdvUCSuiteK9 yes yes no no yes
cme-srst yes yes no no yes
hseck9 yes no no no no
throughput yes yes no no yes
internal_service yes no no no no
04-05-2022 08:30 PM
Purchase the PAK and apply it.
04-06-2022 12:02 AM
You need to buy a traditional License and install the License, router required a reboot to get effective.
Table 4. Specifications of Cisco 4000 Family Integrated Services Routers
Technical Specifications |
Cisco 4461 |
Cisco 4451 |
Cisco 4431 |
Cisco 4351 |
Cisco 4331 |
Cisco 4321 |
Cisco 4221 |
Aggregate Throughput (Default) |
1.5Gbps |
1 Gbps |
500 Mbps |
200 Mbps |
100 Mbps |
50 Mbps |
35Mbps |
Aggregate Throughput (Performance License) |
3Gbps |
2 Gbps |
1 Gbps |
400 Mbps |
300 Mbps |
100 Mbps |
75 Mbps |
Aggregate CEF Only[5] Throughput (Boost License)
|
Over 7Gbps |
Over 4Gbps |
Over 4Gbps |
Over 2Gbps |
Over 2Gbps |
1.5Gbps |
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide