Cisco Router 2800 Error Details Inside

[Lost & Found]

Hi,

I would like to ask how to troubleshoot this kind of error.

We have 2 site and to routers configured as port channel

1st scenario:

Router B can ping router A but router A can't ping Router B but we can remote all the servers frm Router A to Router B.

some of the application from site B was not working so I reloaded the Router A after that its working properly.

2nd scenario

From Site B to A we have connection we can remote server from A - B vise versa but the problem is we don't have telephone connection from B to A and A to B but like on the first scenario we can ping B- A but not A-B router and also we can remote A - B. then I reload router A again after that its working.

there's a syslog message always show after a few minutes = 2015-03-11 15:41:15 Local7.Warning 10.34.63.254 230: *Mar 11 08:55:30.430: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed

2015-03-11 15:41:36 Local7.Warning 10.34.63.254 231: *Mar 11 08:55:51.434: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed

2015-03-11 15:41:57 Local7.Warning 10.34.63.254 232: *Mar 11 08:56:12.502: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/K-confg) failed

every minute of the day I receive this messages.

Tried to command show process : CPU

(photo Attached)

How to troubleshoot this error what command should I use to troubleshoot or to test it??

thank you

Arvin R.

[ciscoraju72]

hi Arvin

could you please check service config is enabled or not, i think its enabled in your case, because its trying to autoload the configuration from a network server.

cheers

Raju

[Lost & Found]

Hi,

voice-card 0
!
!
!
!
!
archive
 log config
  hidekeys
!

How about this?

thanks

[Leo Laohoo]

How about this?

Please do this:  

config t

no service config

end

wr

[Lost & Found]

Hi,

I would like to ask If that command can't affect our configuration?

thanks 

Arvin R

[Leo Laohoo]

I would like to ask If that command can't affect our configuration?

I know, for a fact, this command will not affect MY NETWORK.  I can't make an opinion of other people's network.  

To ensure the future with your employer, get a proper change control done.

[Lost & Found]

Hi,

transferred the commands to my test router but I haven't receive any error unlike the production router.

any idea?

thanks