Cisco Router for Hub spoke topology

aehtibarov · ‎09-30-2021

Hi guys,

I am looking for new cisco router that will take place of ISR 3925.

I will need more than 700 mb encryption throughput(3925 has only 250 mb), router should support dmvpn and for future capable , the router should support SDWAN.

I will use this router on Hub and Spoke connection as a hub device.

What would be your suggestion?

marce1000 · ‎10-01-2021

- A generic starting point can be found here :

https://www.cisco.com/c/en/us/products/routers/router-selector.html

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Georg Pauwen · ‎10-01-2021

Hello,

there is no direct replacement for the 3925. From what you say, the (new) 8300 series is probably what you need. It supports SD-WAN and also 5Gbps of IPSec traffic (allowing for future growth). DMVPN is supported as well.

https://www.cisco.com/c/en/us/products/collateral/routers/catalyst-8300-series-edge-platforms/datasheet-c78-744088.html?oid=dstetr023050

Chris_R1 · ‎10-01-2021

The ISR4400 series may also support your requirements.

paul driver · ‎10-01-2021

Have a look at meraki, MX75 upwards would probably be applicable, is loaded with security (AMP,IDS/IPS,Content filtering etc.. High throughput inc vpn, even with all its security feature enabled, Supports multiple s2s vpn, and clients plus SDWAN. - Here

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul