Cisco Router for Hub spoke topology

[aehtibarov]

Hi guys,

I am looking for new cisco router that will take place of ISR 3925.

I will need more than 700 mb encryption throughput(3925 has only 250 mb), router should support dmvpn and for future capable , the router should support SDWAN.

I will use this router on Hub and Spoke connection as a hub device.

What would be your suggestion?

[marce1000]

 - A generic starting point can be found here :

                  https://www.cisco.com/c/en/us/products/routers/router-selector.html

  M.

[Georg Pauwen]

Hello,

there is no direct replacement for the 3925. From what you say, the (new) 8300 series is probably what you need. It supports SD-WAN and also 5Gbps of IPSec traffic (allowing for future growth). DMVPN is supported as well.

https://www.cisco.com/c/en/us/products/collateral/routers/catalyst-8300-series-edge-platforms/datasheet-c78-744088.html?oid=dstetr023050

[Chris_R1]

The ISR4400 series may also support your requirements.

[paul driver]

Have a look at meraki, MX75 upwards would probably be applicable, is loaded with security (AMP,IDS/IPS,Content filtering etc.. High throughput inc vpn, even with all its security feature enabled, Supports multiple s2s vpn, and clients plus SDWAN. - Here