09-16-2023 10:52 AM
Hi,
I am working to deploy cisco router to one of my project. Please help/suggest me to choose a model that meet below specification-
Minimun specification requirement as below-
1U Chassis Rack Mountable.
The Router should have minimum 4x 1 Gigabit Ethernet WAN ports and 4-port Layer 2 GE Switch Network Interface Module.
minimum 1 NIM slot for future upgradable.
Router should support at least IPv4 Forwarding minimum upto 25M (Aggr, 50M)
should support IPv4 Forwarding Throughput scalable up to 3.5Gbps and IPsec Throughput scalable up to 500 Mbps.
Number of IPsec VPN Tunnels minimum 1500. |
Router should have DRAM 8GB |
Router should have onboard Flash storage minimum 2GB. |
Number of ACLs per system: 4000 |
Number of IPv4 ACEs per system: 70K |
Number of IPv4 Routes: 750,000 |
Number of IPv6 Routes: 750,000 |
Number of Queues: 15K |
Number of NAT Sessions: 550,000 |
Number of VRFs: 1800 |
Number of firewall sessions 510,000.
Fixed Power Supply.
Should have IPv4, IPv6, static routes, RIP and RIPv2, OSPF, EIGRP, BGP, BGP Router Reflector, IS-IS, IGMPv3, PIM SM, SSM, RSVP, ERSPAN, IPSLA, EEM, IKE, ACL, EVC, DHCP, Frame Relay, DNS, LISP, HSRP, RADIUS, Authentication, Authorization, and Accounting (AAA), AVC, DVMRP, IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IPsec, L2TPv3, BFD, IEEE 802.1ag, and IEEE 802.3ah.
Thanks
Imran
09-16-2023 01:58 PM
Hello @imranul hoque
check C8200 series routers:
09-16-2023 02:54 PM
Looks you copied most of the spec from Cat 8K model of cisco.
09-16-2023 10:50 AM
Hi,
I am working to deploy cisco router to one of my project. Please help/suggest me to choose a model that meet below specification-
Minimun specification requirement as below-
1U Chassis Rack Mountable.
The Router should have minimum 4x 1 Gigabit Ethernet WAN ports and 4-port Layer 2 GE Switch Network Interface Module.
minimum 1 NIM slot for future upgradable.
Router should support at least IPv4 Forwarding minimum upto 25M (Aggr, 50M)
should support IPv4 Forwarding Throughput scalable up to 3.5Gbps and IPsec Throughput scalable up to 500 Mbps.
Number of IPsec VPN Tunnels minimum 1500. |
Router should have DRAM 8GB |
Router should have onboard Flash storage minimum 2GB. |
Number of ACLs per system: 4000 |
Number of IPv4 ACEs per system: 70K |
Number of IPv4 Routes: 750,000 |
Number of IPv6 Routes: 750,000 |
Number of Queues: 15K |
Number of NAT Sessions: 550,000 |
Number of VRFs: 1800 |
Number of firewall sessions 510,000.
Fixed Power Supply.
Should have IPv4, IPv6, static routes, RIP and RIPv2, OSPF, EIGRP, BGP, BGP Router Reflector, IS-IS, IGMPv3, PIM SM, SSM, RSVP, ERSPAN, IPSLA, EEM, IKE, ACL, EVC, DHCP, Frame Relay, DNS, LISP, HSRP, RADIUS, Authentication, Authorization, and Accounting (AAA), AVC, DVMRP, IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IPsec, L2TPv3, BFD, IEEE 802.1ag, and IEEE 802.3ah.
Thanks
Imran
09-16-2023 08:01 PM
Get a reputable systems integrator.
https://community.cisco.com/t5/switching/cisco-switch-selection-query-need-urgent-help/m-p/4924494
Base on the number of threads created, you are out of your depth. One wrong move and it will cost you a fortune to correct.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide