Form Factor | Rack Mountable Chassis |
Environment | Maintain International Quality Environmental Safety Standard |
Should have multiple Processor/CPU bases architecture with the dedicated control plane and service plane |
Should provide traffic performance 350 Mbps or more |
Memory | Minimum 4 GB DRAM & minimum 4 GB Flash |
Interface | 2 WAN Port (2x Copper Gigabit Ethernet) with 8 x 1 GE LAN Port and should support POE Module (4 POE r 2 POE+) |
Management | 1 x console, 1 x USB 2.0 Type A Port |
Should support minimum 50 Mbps IPSec performance from day 1 which will be upgradable to 200 Mbps. |
Should support static routes, RIP and RIPv2, OSPF, BGP, IS-IS, IGMPv3, PIMSM,SSM,RSVP, ACL, AVC and BFD |
Should support LISP, Virtual Private LAN Services (VPLS), L2TPv3, MPLS & Ethernet over MPLS. |
Network Service | IPv4, DNS, DHCP Clint, DHCP Server, DHCP Relay, NAT & AAA. |
Should support hardware assisted VPN acceleration for crypto performance in future without any hardware change. |
Security | Should support DES, 3DES, VPN compliant IPSec, AES-128 or AES-256 for encryption and RSA (748/1024/2048 bit) and ECDSA (256/384 bit) as authentication protocol in future without any hardware change |
Should support PPPoE, Layer 2 Tunneling Protocol Version 3, Layer 2 and Layer 3 VPN, Ethernet Virtual Connections as well as IKEv2 IPSec based VPN, Crypto VPN, GRE VPN, site-to-site, dynamic multisite hub-and-spoke, multisite spoke and spoke, remote access software based VPN over IPv4 and IPv6, multicast traffic over the VPN in future without any hardware change. |
Should support hardware assisted VPN acceleration for crypto performance. |
Should support dynamic failover protocols such as virtual Router Redundancy Protocol (VRRP, RFC 2338) |
