01-18-2022 08:27 PM - last edited on 01-19-2022 02:48 AM by Translator
Have a cisco 2960 x-series switch that I am about to retire. I do not have a spare of such model but would like to copy configs to the SG220 switch. I hit wall in the Global Configuration when the SG220 could not accept the
"service"
command.
For example: Trying to paste this command in (below)
no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime service timestamps log datetime msec localtime
Output:
Switch40B404(config)#no service pad es-in seUnknown command Switch40B404(config)#rvice tcp-keepalives-out service timestamps debug datetime msec localtime service timestamps log datetime msec localtimeservice tcp-keepalives-in Unknown command Switch40B404(config)#service tcp-keepalives-out Unknown command Switch40B404(config)#service timestamps debug datetime msec localtime Unknown command Switch40B404(config)#service timestamps log datetime msec localtime
How can I solve this?
Kindly assist.
Solved! Go to Solution.
01-18-2022 11:51 PM
- sg220 does not run IOS , you need to look at administrative guide(s) for equivalent command(s) , if available.
M.
01-18-2022 11:51 PM
- sg220 does not run IOS , you need to look at administrative guide(s) for equivalent command(s) , if available.
M.
01-19-2022 12:23 AM
Thank you. Spent awhile trying to figure it out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide