cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
623
Views
1
Helpful
1
Replies

Cisco7206 reporting %FIB-4-FIBBADSNMPPREFIX errors

mayambanzumba
Level 1
Level 1

Hi,

This alarm does not appear to be causing any service impact but was noticed on the log of the

Cisco 7206VXR, therefore I would like to investigate and find out the cause/reason. This router was recently been brought into production. The IOS version in use is c7200p-advsecurityk9-mz.124-11.T2.bin

The error is as follows:

%FIB-4-FIBBADSNMPPREFIX: Invalid prefix passed to CEF SNMP walker (0.0.0.1/0)., -Traceback= 0x184176C 0x1A83840 0x1E0290C 0x1E01214 0x24CA65C 0x24CE96C 0x24BE350 0x24EAA8C 0x132D090

Many thanks

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi,

This is CSCsi02671. No workaround. Fixed in the next maintenance release.

Hope this helps, please rate post if it does!

View solution in original post

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi,

This is CSCsi02671. No workaround. Fixed in the next maintenance release.

Hope this helps, please rate post if it does!