02-14-2011 03:09 AM - edited 03-04-2019 11:25 AM
I have been using the Cisco7613 and FlexWAN with PA-8E1-IMA PortAdapter.
It has been used for ITP (SIGTRAN)
Today, I attemted to enter the PorAdapter 13 1 module with using command that "attach" command.
SG10#attach 13 1
But I couldn't that. and I could see the Error Message below.
" RTTYC_ATTACH_REQ Failed with return code 2 , aborting "
What's mean this message? and what is this mean?
This Module (13 1) is working normal. but why cannot enter to the PA ?
And what should i do?
My customer is wondering this symptoms.
Help me.
02-17-2011 12:47 AM
Hello,
could you please post a "sh module" from the box?
Br Jürgen
02-17-2011 02:21 AM
Thankyou for reply.
Here are "show module" part of log below -
SG10#show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1038BVGA
2 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1038BVG7
3 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1038BVGR
4 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1038BKVH
5 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1217FTOR
6 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1217FYQ2
7 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL SAL1113KBWD
8 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAD1208028V
9 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1115CWQ7
10 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1217FTMV
11 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE1217FTOM
12 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE11506FQI
13 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAE11506EU2
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0019.2f2c.c160 to 0019.2f2c.c19f 2.3 12.2(2009060 12.2(2009060 Ok
2 0019.2f2c.c020 to 0019.2f2c.c05f 2.3 12.2(2009060 12.2(2009060 Ok
3 0019.2f2c.c0e0 to 0019.2f2c.c11f 2.3 12.2(2009060 12.2(2009060 Ok
4 0019.2f2c.bce0 to 0019.2f2c.bd1f 2.3 12.2(2009060 12.2(2009060 Ok
5 0021.552e.89c0 to 0021.552e.89ff 2.3 12.2(2009060 12.2(2009060 Ok
6 0021.552e.5cc0 to 0021.552e.5cff 2.3 12.2(2009060 12.2(2009060 Ok
7 0016.4708.2500 to 0016.4708.2503 5.3 8.4(2) 12.2(2009060 Ok
8 0017.944a.b6d4 to 0017.944a.b6d7 5.6 8.5(2) 12.2(2009060 Ok
9 0019.e843.0d40 to 0019.e843.0d7f 2.3 12.2(2009060 12.2(2009060 Ok
10 0021.5583.39c0 to 0021.5583.39ff 2.3 12.2(2009060 12.2(2009060 Ok
11 0021.552e.73c0 to 0021.552e.73ff 2.3 12.2(2009060 12.2(2009060 Ok
12 001e.4a4c.ee50 to 001e.4a4c.ee8f 2.3 12.2(2009060 12.2(2009060 Ok
13 001a.a106.6380 to 001a.a106.63bf 2.3 12.2(2009060 12.2(2009060 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
7 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1113KDXY 1.8 Ok
7 MSFC3 Daughterboard WS-SUP720 SAL1113KCD1 2.6 Ok
8 Policy Feature Card 3 WS-F6K-PFC3BXL SAD120706A0 1.8 Ok
8 MSFC3 Daughterboard WS-SUP720 SAD120806JB 3.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
6 Pass
7 Pass
8 Pass
9 Pass
10 Pass
11 Pass
12 Pass
13 Pass
02-17-2011 02:52 AM
Hi,
to connect to a specific hw-module, in your case module 13 please try ...
7613#attach 13
Trying Switch ...
Entering CONSOLE for Switch
Type "^C^C^C" to end this session
7613-cfc13#
I hope, i could help you ... please let me know !
Br
Jürgen
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: