Clear Counters on 3660 T3 controller

[cudaloco]

How do you clear the counters on a T3 controller in a 3660 without rebooting or taking the circuit down?

[b-ulrich]

Hi, I do not believe there is a 'clear counters T3' command, however I just tried a general'clear counters' on one of our routers that has a T3 and it did reset the T3 counters.

Bill

[cudaloco]

Hey Bill,

I've tried that but when i do sh controll atm1/0 i still see the counters populated.

TX cells 7829

TX bytes 414937

Last output time 00:14:42

RX cells 8372

RX bytes 1227109

Last input time 00:14:42

Line Code Violations (LCV) 66982

DS3: F/M-bit errors 1979

DS3: parity errors 263

DS3: path parity errors 230

DS3/E3: G.832 FEBE errors 2051886

T3/E3: excessive zeros 15414

uncorrectable HEC errors 123

idle/unassigned cells dropped 0

LCV errored secs 3

DS3: F/M-bit errored secs 3

DS3: parity errored secs 3

DS3: path parity errored secs 3

T3/E3: excessive zeros errored secs 3

DS3/E3: G.832 FEBE errored secs 848

uncorrectable HEC errored secs 3

LCV error-free secs 861

DS3: F/M-bit error-free secs 861

DS3: parity error-free secs 861

DS3: path parity error-free secs 861

T3/E3: excessive zeros error-free secs 861

DS3/E3: G.832 FEBE error-free secs 16

uncorrectable HEC error-free secs 861

Thanks,

J.