Hi,
I tried upgrading my GSR's IOS. while i was half way through the download of the IOS, i had accidently terminated the file copy by closing the tftp server. In the 'show disk0:' command the file which i was trying to copy is shown with a file length of 5455872 bytes. To upload the file again i tried deleting the existing half copied IOS. But i get the following message "%Error deleting disk0:c12kprp-p-mz.120-32.S4.bin (Cluster chain broken on file)"
I could not squeeze the disk also.
The show version, disk0 of the router are given below:
========================================
Router#sh disk0:
-#- --length-- -----date/time------ path
1 5455872 Jan 12 2007 22:49:32 c12kprp-p-mz.120-32.S4.bin
2 18220064 Jan 14 2007 00:07:02 c12kprp-k3p-mz.120-25.S1.bin
3 26308840 Jan 14 2007 00:42:30 c12kprp-p-mz.120-32.S44.bin
13959168 bytes available (49938432 bytes used)
Router#delete disk0:c12kprp-p-mz.120-32.S4.bin
Delete filename [c12kprp-p-mz.120-32.S4.bin]?
Delete disk0:c12kprp-p-mz.120-32.S4.bin? [confirm]
%Error deleting disk0:c12kprp-p-mz.120-32.S4.bin (Cluster chain broken on file)
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) GS Software (C12KPRP-K3P-M), Version 12.0(25)S1, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 03-Jul-03 05:43 by nmasa
Image text-base: 0x00010000, data-base: 0x0325A000
ROM: System Bootstrap, Version 12.0(20030502:164925) [spalleti-24S 1.6dev(0.1)]
DEVELOPMENT SOFTWARE
BOOTLDR: GS Software (C12KPRP-K3P-M), Version 12.0(25)S1, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc1)
Router uptime is 33 weeks, 5 days, 16 hours, 53 minutes
System returned to ROM by reload
System restarted at 16:20:14 IST Mon May 22 2006
System image file is "disk0:c12kprp-k3p-mz.120-25.S1.bin"
cisco 12410/PRP (MPC7450) processor (revision 0x00) with 524288K bytes of memory
.
MPC7450 CPU at 665Mhz, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from power-on
2 Route Processor Cards
2 Clock Scheduler Cards
5 Switch Fabric Cards
2 8-port OC3 POS controllers (16 POS).
1 four-port OC12 POS controller (4 POS).
1 twelve-port DS3 controller (12 DS3).
2 Four Port Gigabit Ethernet/IEEE 802.3z controllers (8 GigabitEthernet).
4 OC12 channelized to STS-12c/STM-4, STS-3c/STM-1 or DS-3/E3 controllers
2 Ethernet/IEEE 802.3 interface(s)
8 GigabitEthernet/IEEE 802.3 interface(s)
7 Serial network interface(s)
27 Packet over SONET network interface(s)
2043K bytes of non-volatile configuration memory.
62720K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
========================================
Currently as a workaround i had copied the IOS into the bootflash. Kinldy suggest how i would be able to delete this file from disk0:
thanks in advance,
Karthi.
