Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My standby firewall automatically reboots. I have changed the Failover cable and the RAM as well. Still the issue is not arrested. Attached the log when captured during automatic reload.
I think i have a issue in the switchport configuration of the VG248. When 'switchport voice vlan 10' is configured, the VG248 will not communicate to the entire network. Instead, when 'switchport access vlan 10' is configured for the same vlan, it wi...
Hi,The customer has bought a new server for the existing Call manager cluster. The server part number is MCS-7845-H2-IPC1. The present cluster is running on 4.1.3 with SR5d. I am trying to build the new server as a Subscriber. So when i started with ...
Dear Networkers, I am facing a peculiar issue while trying to generate the user / extension based report from CDR. After i select the extension and i say generate report, its throwing me 'error code 10012' Database Error. Contact System Administrator...
Hi,I have some Cisco 7941 phones, which are stuck in upgrade screen. Can someone help me in solving this problem. The tftp server seems to be fine. Connected other working phones to the same port and they are booting fine.Is there any recovery proced...
Rick,In my situation, i have 20 routers connected to cisco 6500 on a particular VLAN. There is no L3 VLAN interface created in the switch. So the VLAN is just added in the VLAN database. A Cisco PIX firewall which is running 6.3.5 is connected to t...
Rick,Thanks for the clarification.What i meant by the CPU processing is that, if the switch is not doing a proxy function, it has to do broadcast each and every packet and update its switching table frequently. Thought this might add to the CPU utili...
Rick,What would be the disadvantages in a network perspective, we might see by disabling 'proxy arp' ? Will it affect the CPU processing speed, because of constant route / switching table updates...Karthik
Rick,I have this issue, many routers connected to the firewall on the same subnet, via a c6500 with sup 32. Show arp command from the pix, returned an output that all the IP address of the routers connected on the same subnet, were having a single MA...
