Command to install Port License in ASR1001-HX

[robinsinghal271]

Hi,

I want to install a Port License in ASR1001-HX but not getting the proper documents to install it.

License Install

command is not able to work. Pls help.

Thanks

Robin

[balaji.bandi]

You need to provide more informmation :

show version

here is install document :

https://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/1001HX_1002HX/b_ASR1001HX-1002HX_HIG/b_ASR1001HX-1002HX_HIG_chapter_0110.html#d26032e287a1635

[Georg Pauwen]

Hello,

which IOS version are you running ? Keep in mind that starting with 16.10, smart licensing is mandatory.

https://www.youtube.com/watch?v=47Tflbt4NEc

[robinsinghal271]

Hi,

Thanks for quick response.

Pls find below the details of "show version"

Router#show version

Cisco IOS XE Software, Version 17.06.03a
Cisco IOS Software [Bengaluru], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-
M), Version 17.6.3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2022 by Cisco Systems, Inc.
Compiled Fri 08-Apr-22 04:50 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2022 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: 16.3(2r)

Router uptime is 2 minutes
Uptime for this control processor is 5 minutes
System returned to ROM by IntelResetRequest
System image file is "bootflash:asr1000-universalk9.17.06.03a.SPA.bin"
Last reload reason: IntelResetRequest

This product contains cryptographic features and is subject to United
States and local country laws governing

import, export, transfer

and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to

import, export, distribute or use encryption

Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Type: Smart License is permanent
License Level: adventerprise
Next reload license Level: adventerprise

The current crypto throughput level is 0 kbps

Smart Licensing Status: Registration Not Applicable/Not Applicable

cisco ASR1001-HX (1SR) processor (revision 1SR) with 3742322K/6147K bytes of mem
ory.
Router operating mode: Autonomous
Crypto Hardware Module present
8 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
29401087K bytes of eUSB flash at bootflash:.

Configuration register is 0x2102

@Georg Pauwen  I am using IOS version 17.06.03a. Smart license is also enabled.

@balaji.bandi I have already checked that document but it is helpful with

show 

commands. I need commands to install the port license.

Thanks

Robin

[robinsinghal271]

Hi,

Please help me with the solution.

Thanks

Robin

[Leo Laohoo]

The router is already on 17.X.X so this means Cisco Smart License is enabled.  This also means the command

license install

is no longer supported. 

Please post the complete output to the command

sh license summary

[robinsinghal271]

Hi Leo,

Please find below the output.

Router#sh license summary
License Usage:
License                        Entitlement Tag                               Count Status
-----------------------------------------------------------------------------
adventerprise                (ASR_1000_AdvEnterprise)              1 IN USE
advipservices                (ASR_1000_AdvIpservices)              1 IN USE
interface_1g                 (ASR_1000_HX_1GE_2P)                 2 IN USE
interface_10g               (ASR_1000_HX_10GE_2P)               2 IN USE

That's all I found with this command.

Thanks

Robin

[Leo Laohoo · Accepted solution]

---

@robinsinghal271 wrote:

interface_1g                 (ASR_1000_HX_1GE_2P)                 2 IN USE
interface_10g               (ASR_1000_HX_10GE_2P)               2 IN USE

---

Cisco Smart License has cleared the router to enable both the 1- and 10 Gbps ports.  

Now, what "port license" are you wishing to enable?

[robinsinghal271]

Thanks @Leo Laohoo 

I was not aware with this concept. Thank you so much for the clearance.

Robin