07-16-2022
03:58 AM
- last edited on
07-23-2022
05:20 AM
by
Translator
Hi,
I want to install a Port License in ASR1001-HX but not getting the proper documents to install it.
License Install
command is not able to work. Pls help.
Thanks
Robin
Solved! Go to Solution.
07-21-2022
03:50 PM
- last edited on
07-23-2022
05:48 AM
by
Translator
@robinsinghal271 wrote:
interface_1g (ASR_1000_HX_1GE_2P) 2 IN USE
interface_10g (ASR_1000_HX_10GE_2P) 2 IN USE
Cisco Smart License has cleared the router to enable both the 1- and 10 Gbps ports.
Now, what "port license" are you wishing to enable?
07-16-2022
05:43 AM
- last edited on
07-23-2022
05:22 AM
by
Translator
You need to provide more informmation :
show version
here is install document :
07-17-2022 01:23 AM
Hello,
which IOS version are you running ? Keep in mind that starting with 16.10, smart licensing is mandatory.
07-17-2022
11:32 PM
- last edited on
07-23-2022
05:44 AM
by
Translator
Hi,
Thanks for quick response.
Pls find below the details of "show version"
Router#show version
Cisco IOS XE Software, Version 17.06.03a
Cisco IOS Software [Bengaluru], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-
M), Version 17.6.3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2022 by Cisco Systems, Inc.
Compiled Fri 08-Apr-22 04:50 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2022 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: 16.3(2r)
Router uptime is 2 minutes
Uptime for this control processor is 5 minutes
System returned to ROM by IntelResetRequest
System image file is "bootflash:asr1000-universalk9.17.06.03a.SPA.bin"
Last reload reason: IntelResetRequest
This product contains cryptographic features and is subject to United
States and local country laws governing
import, export, transfer
and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to
import, export, distribute or use encryption
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Type: Smart License is permanent
License Level: adventerprise
Next reload license Level: adventerprise
The current crypto throughput level is 0 kbps
Smart Licensing Status: Registration Not Applicable/Not Applicable
cisco ASR1001-HX (1SR) processor (revision 1SR) with 3742322K/6147K bytes of mem
ory.
Router operating mode: Autonomous
Crypto Hardware Module present
8 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
29401087K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
@Georg Pauwen I am using IOS version 17.06.03a. Smart license is also enabled.
@balaji.bandi I have already checked that document but it is helpful with
show
commands. I need commands to install the port license.
Thanks
Robin
07-20-2022 09:54 PM
Hi,
Please help me with the solution.
Thanks
Robin
07-20-2022
11:24 PM
- last edited on
07-23-2022
05:45 AM
by
Translator
The router is already on 17.X.X so this means Cisco Smart License is enabled. This also means the command
license install
is no longer supported.
Please post the complete output to the command
sh license summary
07-21-2022
12:46 AM
- last edited on
07-23-2022
05:46 AM
by
Translator
Hi Leo,
Please find below the output.
Router#sh license summary
License Usage:
License Entitlement Tag Count Status
-----------------------------------------------------------------------------
adventerprise (ASR_1000_AdvEnterprise) 1 IN USE
advipservices (ASR_1000_AdvIpservices) 1 IN USE
interface_1g (ASR_1000_HX_1GE_2P) 2 IN USE
interface_10g (ASR_1000_HX_10GE_2P) 2 IN USE
That's all I found with this command.
Thanks
Robin
07-21-2022
03:50 PM
- last edited on
07-23-2022
05:48 AM
by
Translator
@robinsinghal271 wrote:
interface_1g (ASR_1000_HX_1GE_2P) 2 IN USE
interface_10g (ASR_1000_HX_10GE_2P) 2 IN USE
Cisco Smart License has cleared the router to enable both the 1- and 10 Gbps ports.
Now, what "port license" are you wishing to enable?
07-23-2022 05:14 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide