Configuration buffer full error

[Ramesh Babu]

Dear Friends,

When i am executed wr mem or copy run startup, at the time i am getting following error, kindly assist me how solve this issues,

#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...

% Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram.
Continue? [no]:
% Configuration buffer full, can't add command: vrf xxxx
%Aborting Save. Compress the config, Save it to flash or Free up space on device[OK]

#dir
Directory of flash0:/

1 -rw- 95890300 Oct 2 2015 02:08:36 +09:00 c2900-universalk9-mz.SPA.153-3.M5.bin
2 -rw- 3064 Sep 9 2014 13:32:54 +09:00 cpconfig-29xx.cfg
3 -rw- 80804 Oct 19 2014 02:39:48 +09:00 xxC_NATs.txt
4 drw- 0 Sep 9 2014 13:33:22 +09:00 ccpexp
245 -rw- 2464 Sep 9 2014 13:35:04 +09:00 home.shtml
246 -rw- 99507376 Oct 13 2014 22:54:16 +09:00 c2900-universalk9-mz.SPA.152-4.M7.bin
247 -rw- 2211 Oct 15 2014 22:20:36 +09:00 FTX1837AHNY_201410150616582970.lic
248 -rw- 282575 Oct 25 2016 15:47:34 +09:00 running-config-25-10-2016

256487424 bytes total (58261504 bytes free)

#sh ver

ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)

System image file is "flash0:c2900-universalk9-mz.SPA.153-3.M5.bin"

Cisco CISCO2921/K9 (revision 1.0) with 483328K/40960K bytes of memory.

255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

Thanks & Regards,

Ramesh Babu.A.

[cae_technology]

Hi, did you manage to get this working? I got the same problem too....HELP

[marce1000]

 - Try a reboot, if that does not help , use the latest advisory release (upgrade) ,  could be a software bug :

           https://software.cisco.com/download/home/282774229/type/280805680/release/15.7.3M8

 M.

[cae_technology]

Thanks, Marce we did upgrade to the gold star 15.5 well the gold version for the 6800 switch and will let you know how i get on. 

[Georg Pauwen]

Hello,

there used to be the command below:

service compress-config

Check if that is still available...

[cae_technology]

Georg tried that already but im going to do what Marce advised or go through the config and remove some unnecessary configuration  

[Georg Pauwen]

Hello,

an even older command used to be 'boot buffersize', not sure if that is still around...