10-16-2008 01:29 AM - edited 03-03-2019 11:56 PM
I have a Cisco Routers LAP
one of my trained students puts by mistake on a router Configuration Register 0x1242
I can not now loggin in Router by console ( unfortunately no other ports configured to access )
what can we do to take it back ?
Regards,
Solved! Go to Solution.
10-16-2008 04:20 AM
Hello Ahmed,
the new settings has changed the console speed.
If you can access via telnet the LAP open a session and change it back to 0x2102
conf t
config-register 0x2102
otherwise via console try with:
1200 bps
2400 bps
4800 bps
115000 bps
one of these should be the new speed
Hope to help
Giuseppe
10-16-2008 04:20 AM
Hello Ahmed,
the new settings has changed the console speed.
If you can access via telnet the LAP open a session and change it back to 0x2102
conf t
config-register 0x2102
otherwise via console try with:
1200 bps
2400 bps
4800 bps
115000 bps
one of these should be the new speed
Hope to help
Giuseppe
10-16-2008 12:49 PM
Hello,
I've found a reference:
bits 11 and 12
11-12 0x0800 to 0x1800 Console line speed:
[12/11] Hex Baud
00 0x0000 9600
01 0x0800 4800
10 0x1000 1200
11 0x1800 2400
Hope to help
Giuseppe
10-27-2008 08:58 AM
Thank You my friends
It works at 1200
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide