I already configured the following: Card Type and Controller for T3 Interface
- card type t3 1
- controller t3 1/0
- framing c-bit
- cablelegnth 300
- clock source line
DSU Mode and Bandwidth
- dsu mode 1
- dsu bandwidth 44210
Primary IP Addess
show controller t3 1/0 is down..
How to set loopbacks to verify T3 configuration on 3925 router.
Interface SM1/1: do I have to assign an IP Address or use the default 192.168.2.1 255.25.255.240 in this inferface.
