configuring ehwic-4esg module Proper cli commands

[lacroixjamie201938782]

My issue is that I'm not able to find the correct documentation. Cisco active Advisor did in fact show the module is there and working.

The ones that do with the Cisco2951/K9 appear to be there with a show ip interface brief, keep getting this error.

%  IP addresses may not be configured on L2 links.

Any help would be greatly appreciated.

[Giuseppe Larosa]

Hello @lacroixjamie201938782 ,

post

show diag

show inventory

to see if the module is correctly recognized by the router

the message:

>> % IP addresses may not be configured on L2 links.

this is just a warning telling that IP addresses cannot be configured on switch ports like the ones that the module provides so this should not be a serius issue. Instead, it can be the sign that the module is correctly recognized.

Hope to help

Giuseppe

[lacroixjamie201938782]

C2951-UNIVERSALK9-M#show diag
Slot 0:
C2951 Mother board 3GE, integrated VPN and 4W Port adapter, 11 ports
Port adapter is analyzed
Port adapter insertion time 00:09:58 ago

Hardware Crypto Engine Details:
The CHIP id is 0x0
The SEC revision no is 0x1

EEPROM contents at hardware discovery:
PCB Serial Number : FOC17328HY3
Hardware Revision : 1.1
Part Number : 73-11836-08
Top Assy. Part Number : 800-30793-06
Board Revision : A0
Deviation Number : 0
Fab Version : 03
Product (FRU) Number : CISCO2951/K9
Version Identifier : V06
CLEI Code : CMMKD00ARA
Processor type : C8
Chassis Serial Number : FTX1740AJCH
Chassis MAC Address : c067.af78.a940
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 37 33 32 38 48 59 33 40
0x10: 06 15 41 01 01 82 49 2E 3C 08 C0 46 03 20 00 78
0x20: 49 06 42 41 30 88 00 00 00 00 02 03 CB 8C 43 49
0x30: 53 43 4F 32 39 35 31 2F 4B 39 89 56 30 36 20 D9
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4B 44 30 30 41 52
0x50: 41 09 C8 C2 8B 46 54 58 31 37 34 30 41 4A 43 48
0x60: C3 06 C0 67 AF 78 A9 40 43 00 60 C4 08 00 00 00
0x70: 00 00 00 00 00 F3 00 03 40 01 63 FF FF FF FF FF
0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Internal Power Supply information
Top Assy. Part Number : 341-0226-03
Deviation Number : 0
PCB Serial Number : DCA1724K0D3
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Version Identifier : V03
Product (FRU) Number : PWR-2921-51-AC
CLEI Code : 0000000000
Board Revision : A0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 E2 DF 45 01 55 00 E2 03 88 00 00 00
0x10: 00 C1 8B 44 43 41 31 37 32 34 4B 30 44 33 03 00
0x20: 81 00 00 00 00 04 00 89 56 30 33 20 CB 8E 50 57
0x30: 52 2D 32 39 32 31 2D 35 31 2D 41 43 C6 8A 30 30
0x40: 30 30 30 30 30 30 30 30 F3 00 59 41 01 22 42 00
0x50: 05 F8 00 50 01 F3 18 3B 02 F0 19 D9 03 E8 1B 76
0x60: 04 E2 1C 49 05 D9 1D 1B 06 D8 1D ED 07 CF 1E BF
0x70: 08 CE 1F 40 09 C2 1F B8 0A B8 20 34 0B B7 20 B0
0x80: 0D AF 21 0C 0F 9F 21 67 11 91 21 94 13 87 21 C0
0x90: 17 6E 21 DB 1B 57 21 EA 1F 3F 21 E2 23 28 21 D4
0xA0: 27 0A 21 CD 42 41 30 FF FF FF FF FF FF FF FF FF
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:
4 Port GE Switch
PCB Serial Number : FOC18417N3A
Hardware Revision : 1.0
Part Number : 74-7105-01
Board Revision : E0
Deviation Number : 0
Product (FRU) Number : EHWIC-4ESG
Version Identifier : V01
CLEI Code : COUIA46CAA
Base MAC Address : 881d.fc9f.b648
MAC Address block size : 8
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 06 B5 C1 8B 46 4F 43 31 38 34 31 37 4E
0x10: 33 41 41 01 00 82 4A 1B C1 01 42 45 30 88 00 00
0x20: 00 00 CB 8A 45 48 57 49 43 2D 34 45 53 47 89 56
0x30: 30 31 20 D9 03 40 C1 CB C6 8A 43 4F 55 49 41 34
0x40: 36 43 41 41 CF 06 88 1D FC 9F B6 48 43 00 08 FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 1:
4 Port GE Switch
PCB Serial Number : FOC162171D4
Hardware Revision : 1.0
Part Number : 74-7105-01
Board Revision : C0
Deviation Number : 0
Product (FRU) Number : EHWIC-4ESG
Version Identifier : V01
CLEI Code : COUIA46CAA
Base MAC Address : d48c.b542.41a0
MAC Address block size : 8
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 06 B5 C1 8B 46 4F 43 31 36 32 31 37 31
0x10: 44 34 41 01 00 82 4A 1B C1 01 42 43 30 88 00 00
0x20: 00 00 CB 8A 45 48 57 49 43 2D 34 45 53 47 89 56
0x30: 30 31 20 D9 03 40 C1 CB C6 8A 43 4F 55 49 41 34
0x40: 36 43 41 41 CF 06 D4 8C B5 42 41 A0 43 00 08 FF
--More-- (192 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Embedded Service Engine 0/0 :
Total platform memory : 4194304K bytes
Total 2nd core memory : 0K bytes
Start of physical address for 2nd core : 0x20000000
Number of blocks of memory for 2nd core : 1
2nd core configured disabled
L2 cache ways for 2nd core 

show in ventory

C2951-UNIVERSALK9-M#show inventory
NAME: "CISCO2951/K9", DESCR: "CISCO2951/K9 chassis, Hw Serial#: FTX1740AJCH, Hw Revision: 1.1"
PID: CISCO2951/K9 , VID: V06 , SN: FTX1740AJCH

NAME: "4 Port GE Non-POE EHWIC Switch on Slot 0 SubSlot 0", DESCR: "4 Port GE Non-POE EHWIC Switch"
PID: EHWIC-4ESG , VID: V01 , SN: FOC18417N3A

NAME: "4 Port GE Non-POE EHWIC Switch on Slot 0 SubSlot 1", DESCR: "4 Port GE Non-POE EHWIC Switch"
PID: EHWIC-4ESG , VID: V01 , SN: FOC162171D4

NAME: "C2921/C2951 AC Power Supply", DESCR: "C2921/C2951 AC Power Supply"
PID: PWR-2921-51-AC , VID: V03 , SN: DCA1724K0D3

[Giuseppe Larosa]

Hello @lacroixjamie201938782 ,

the output of the two commands show that the modules are correctly recognized.

The only point of attention here is that you have two modules of the same type installed in different slots.

However, you should be fine from what we have seen

Hope to help

Giuseppe