Configuring router DHCP pool with DNS

[rejlive95374]

Hi all 

I am configuring a DHCP router with two DNS servers but I cannot add more than one DNS address to the pool. Every instruction I find tells me to use the

dns-server 192.168.5.2 192.168.5.3 

command but it gives an error. If I add one then add another separately the second entry overwrites the first. Here is a pic of the CLI. 

[Georg Pauwen]

Hello,

odd, as in theory, you should be able to add up to six DNS servers, in exactly the way you do. Which IOS version are you running ?

[rejlive95374]

Here is the info from

sh version:
 
DHCP-SERVER>en
DHCP-SERVER#sh version

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

System returned to ROM by power-on

System image file is

flash:c1841-advipservicesk9-mz.124-15.T1.bin

[Richard Burts]

Is this on actual hardware or is this on some emulator?

[rejlive95374]

Its installed on a Windows 10 pc. No VM or anything like that.

[rejlive95374]

No emulator and I just added the pkt file to the OP if anyone wants to see it.

[JimWicks]

it should be just a string, try enclosing the two addresses in "quotes"

[rejlive95374]

Quotes didn't work. Tried around each address and around both neither worked.

[Georg Pauwen · Accepted solution]

Hello,

the problem is: Packet Tracer is an emulator with a lot of restrictions. The devices do not feature a full and complete IOS, but rather a subset of commands that let you accomplish certain things.

On a 'real' device this would work, but Packet Tracer only allows for one dns server.

[Translator]

These devices do not have a full iOS

[Translator]

thanks for the help!