01-27-2024 08:21 AM - edited 02-02-2024 11:31 AM
I'm trying to connect server 2 from server 1 using port forwarding. Server 2 add server 1 ip 72.12.13.111 as dns record. I'm trying to connect using server 1 web browser to ya.ru:8080. How can I do that? Router 1 configure dynamic nat translation.
I'm trying to use, ip nat inside source static tcp, I tried to each router means router3 and router 1 to translate address and that way to connect web browser. Didn't work well. Appreciate your help. Thanks.???
01-27-2024 10:04 AM
i dont have PT - but if you can post the show run from router- we can help you (or wait for other member who have PT can open and help you )
Generally if the Router doing NAT below example should work :
ip nat inside source static tcp 72.12.13.111 8080 x.x.x.x 8080 extendable
ya.ru resolvable to external IP that should work technically.
02-03-2024 01:09 AM
Thanks for reply Should I do both routers? Can you little more explain
02-03-2024 01:52 AM
This need to be only on Router doing NAT
02-03-2024 01:59 AM
My nat working on Router3 and I did
for router 3. But still not working. Am I anything missing?
02-03-2024 04:11 AM
for router 3. But still not working. Am I anything missing?
Not working you need give more information - the output shows Router (does not match with your Router3
post below information (always post more information, what you have tried ?)
show run
show ip interface brief
show ip route
show ip nat translation (when you initiate the connection from outside)
ping 72.12.13.111
Does the server running web server on port 72.12.13.111 port 8080 ?
02-03-2024 05:44 AM - edited 02-03-2024 05:46 AM
I uploaded pkt file in rar folder. And I don't have any idea which router are you asking about
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide