Dears,
I'm setting up a lab switch, 3560 to a DSL router/modem and i cannot seem to get the routing from VLAN100 to the DSL router/ modem to work.
- int g0/1 is connected to the DSL router/ modem
- int g0/10 is connect to the client (10.10.100.10)
From the 3560, I can ping the DSL router (192.168.1.1), the client (10.10.100.10) and I can ping the internet.
From the client connected to to the 3560, I can ping the g0/1 interface IP address (192.168.1.201), but not the DSL router (192.168.1.1).
From the DSL router, I can ping the internet and the 3560 g0/1 ip address (192.168.1.201) but cannot ping the client (10.10.100.10)
Client Configuration :
IP Address: 10.10.100.10
Subnet Mask: 255.255.255.0
Default Gateway: 10.100.100.1
DNS : 8.8.8.8
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 3560Lab1-DLS2
!
boot-start-marker
boot-end-marker
!
no aaa new-model
system mtu routing 1500
vtp domain TestLab
vtp mode transparent
ip routing
ip name-server 4.2.2.2
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 100
name Home_VLAN
!
interface GigabitEthernet0/1
description To DSL
no switchport
ip address 192.168.1.201 255.255.255.0
!
<snip>
!
interface GigabitEthernet0/10
description Client
switchport access vlan 100
switchport mode access
!
interface Vlan1
no ip address
shutdown
!
interface Vlan100
ip address 10.10.100.1 255.255.255.0
!
ip http server
ip http secure-server
!
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
Appreciate your feedback.