Hi,Is there a way to gracefully shutdown the eBGP neighbour to converge to the other CE router connection with zero outage or packet drop?We have 2 CEs linked together using iBGP and eBGP both connect to different PPE but on the same AS. CE1 -> PPE1 ...
Hi, I'm currently testing the catalyst 3650. I noticed that although it runs on IOSXE, it doesn't seem to have VASI feature. Also I noticed the presence of the "Internal Interface" feature and the "Group VI" feature in the interface command hierarchy...
Hi,I have a CISCO 871 router and WAN interface is FastEthernet4.I cant make it member of a vLan , or in other words, Switchport mode access is not available when I try to configure this interface.Any ideas?
I am configuring a Cisco 1941, Initially a basic configuration (1 ISP and 1 inside network). I made the configuration that I think was ok for use the internet, but i cannot do anything from inside network to outside neither a ping to gateway. It is r...
Hello Community, Heres the scenario:Recently, we have subscribed a second internet line from a different ISP on top of our existing line.Lets named it ISP1 (existing) and ISP2 (new). Problem:Now, I am being tasked to do policy based routing. Eg: HR a...
Hi Everyone, We've just purchased another Cisco ISR, we've had great success with the others which have been deployed however this time we've got one with wireless and it's been a bit of a struggle. I've been able to assigned the IP address, browse...
Hello,I'm planning to connect my sites around 100 sites to the HQ site, the provider will connect them using Layer 2 connectivity "wireless" and i will secure the traffic by using site-to-site VPN "the 100 sites will connect to the HQ Router".I will ...
Hi I am not sure if this is the correct forum but I need to configure a ASA 5506X to do NAT routing. I think I have successfully configured the internal and external interfaces but so far it is still not working. Any assistance would be appreciated.
Can someone tell me the part number for a PoE power supply for the router Cisco 891FW.Note that it doesn't look like the regular 891 power supplies but it looks like a plastic rectangle with 4 pins.Thank you.
Guys, I have the next issue:*I have three routers conected among them, Router 01 has 3 OSPF áreas (0, 10, 30) configured in different processes, in order to connect the other Routers in different áreas, as seen in the diagram attached.Then, there is ...
Hello, I'm receiving "internal" routes from one of our BGP peers on a dedicated bgp (neighbor) peer. Our provider who is sending us their internal routes is AS#1234. Our AS is 2345 (changed for a public post) neighbor xxx.xxx.xxx.82 remote-as 1234 ne...
Hello, I have a problem sending/receiving email through exchange sever outside the office network (Externally) I have already forwarded the following ports to my exchange server 25 - 26 - 80 - 110 - 143 - 443. but it's still wont work.the internet ho...
Hi,I have 10 Mbps internet connection and have two subnets in my router (172.16.1.0 /24 and 172.16.2.0/24)I want to limit 172.16.1.0/24 subnet to 4 Mbps. This subnet shouldn't pass this bandwidth. How can i do that with qos?
ok, I have two ISP's one for data and one used for voice. I would like to put both these ISP's behind our ASA 5505 with sec plus license. I know this can be done in a redundant fashion. My question is can we route one particular vlan that is used ...
I am going to design a two level Route Reflector architecture in order to get scaling and flexibility for the BGP updates coming for a large number of clients. I am not sure of the basic configuration iBGP and iBGP-RR necessarily for create the core...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-05-2025 03:27 AM | ||
| 11-13-2025 04:57 PM | ||
| 11-09-2025 09:51 PM | ||
| 11-06-2025 06:09 PM | ||
| 10-26-2025 02:24 AM |
| User | Count |
|---|---|
| 9 | |
| 4 | |
| 3 | |
| 2 | |
| 2 |
