Hi Together,
we are currently planning to relocate some of our systems from our office into a datacenter. Basically our configuration is the following:
Office:
LAN and WLAN clients which should receive their IPs from the Datacenter DHCP (172.50.0.0 Network)
development servers within the internal network
Local backup
Cisco ASA 5505 will be installed
Datacenter:
Productive servers within the local and dmz network (Exchange, Web, etc.)
2 VLANS one for the DMZ (172.10.0 Network) and one for the internal network (172.50.0.0 Network)
NAT Forwarding of public IPs to DMZ IPs
Cisco ASA 5505 will be installed
What we want to do:
All internet traffic is routed within the location
Clients in the office shall be able to reach any server on the network and servers shall be able to reach any client on the network (both office and datacenter)
My question is, can this be done with an ASA 5505 or do we require something else? Further what are your experiences in such a setup and what would be the best setup to make this setup work ?
Thank you very much
Wolf