04-08-2010 04:56 AM - edited 03-04-2019 08:04 AM
Dear Sir,
normally cisco 7609 and cisco 3725 will take how much current.
show power output of cisco 7609 is
system power redundancy mode = redundant
system power total = 3795.12 Watts (90.36 Amps @ 42V)
system power used = 1713.18 Watts (40.79 Amps @ 42V)
system power available = 2081.94 Watts (49.57 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-4000W-INT 3795.12 90.36 OK OK on
2 WS-CAC-4000W-INT 3795.12 90.36 OK OK on
Pwr-Allocated Oper
Fan Type Watts A @42V State
---- ------------------ ------- ------ -----
1 FAN-MOD-09 241.50 5.75 OK
2 FAN-MOD-09 241.50 5.75 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1 WS-X6182-2PA 99.96 2.38 99.96 2.38 on on
2 WS-X6182-2PA 99.96 2.38 99.96 2.38 on on
3 WS-X6182-2PA 99.96 2.38 99.96 2.38 on on
5 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
6 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
7 WS-X6182-2PA 99.96 2.38 99.96 2.38 on on
8 WS-X6148-RJ-45 100.38 2.39 100.38 2.39 on on
9 WS-X6182-2PA 99.96 2.38 99.96 2.38 on on
Thanks and Regards,
Senthil
04-08-2010 05:16 AM
ok
04-08-2010 05:16 AM
ok
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide