custom nbar rule on Cisco ISR1k

[mario.jost]

We have following device:

roTRO31#show version | include ^cisco
cisco C1113-8PLTEEA (1RU) processor with 1398091K/6147K bytes of memory.

roTRO31#show license all | include ^Cisco 1100
Cisco 1100 Series with 8 LAN Ports, Security License (ISR_1100_8P_Security):
Cisco 1100 Series with 8 LAN Ports, 200 Mbps IPSEC Throughput License (ISR_1100_8P_IPSEC_Throughput_200Mbps):

roTRO31#show version | include image
System image file is "bootflash:c1100-universalk9.16.12.04.SPA.bin"

But we cant create a custom NBAR rule:

roTRO31(config)#ip nbar ?
http-services Enable HTTP services (URL to use is /flash/nbar2/home.html)
protocol-pack Protocol Pack

This feature is even supported on Catalyst 9200 switches now. Is there a different syntax for this feature?

[pieterh]

version: 16.12.04 -> you may need to add the NBAR protocol pack ? 
NBAR2 Protocol Pack Library - Cisco

[mario.jost]

There is already a protocol pack installed on the router:

roTRO31#show ip nbar protocol-pack active 
Active Protocol Pack: 
  Name:                          Standard Protocol Pack
  Version:                       43.0
  Publisher:                     Cisco Systems Inc.
  NBAR Engine Version:           37
  State:                         Active

[Georg Pauwen · Accepted solution]

Hello,

you need the application experience license in order to have support for NBAR.

SL-1100-8P-APP(=)