02-21-2006 12:56 AM - edited 03-03-2019 11:48 AM
Hello,
I have a Core Router 2811 with 8-port analog modem WAN Interface card (NM-8AM-V2) installed at my Head Office. And at each branch offices, we use one-port analog modem (WIC-1AM). The purpose to install those cards is to establish a backup connection from my head office to branch offices, when my lease line connection is cutted down.
Note: The primary link from the Head Office to every Branches Office is Lease Line Connection, and dialup is for backing up.
The questions are:
1- Any inforamation we need to know from the telephone line provider (PSTN).
2- Is there any advice for the configuration, coz i don't have any experience with the dialup backup config.Pls provide me the URL to get the sample configuration.
Any feed back or solution is appreciated.
Regards,
VIN
02-21-2006 01:15 AM
Hi Vin,
Check this link for configuring DDR as backup for lease lines
http://www.cisco.com/warp/public/129/bri-backup-map-watch.html
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cddr.htm
http://www.alliancedatacom.com/manufacturers/cisco-systems/dial_backup/dialbackup_serial.asp
These links will be enough to get you configure your setup.
HTH
Ankur
03-03-2006 12:28 AM
Hi Aukur,
Thanks for sending me the useful URL.
Regards,
VIN
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide