08-12-2023 10:16 PM - last edited on 08-14-2023 10:54 AM by Translator
Hi there,
I'm currently setting up a network for a small local business with the topology seen below. The IT manager of the company specifically asked me to create default routes to be directed to Loopback 1 on ipv4 and ipv6. I can't seem to get it to work and there's no other router in this network. Any ideas?
Loopback 1 ipv4: 209.165.201.97 255.255.255.224
Loopback 1 ipv6: 2001:db8:acad:3f::1/64
Solved! Go to Solution.
08-13-2023 12:02 AM - last edited on 08-14-2023 10:58 AM by Translator
@NorthNW try
#ip route 0.0.0.0 0.0.0.0 lo1
08-12-2023 10:26 PM - last edited on 08-14-2023 10:56 AM by Translator
HI @NorthNW is this real network plan? what is the purpose of setting
default route
towards loopback? what is the error you are getting when configuring
default route
?
08-12-2023 10:55 PM - last edited on 08-14-2023 10:57 AM by Translator
This is a real network, I used Packet Tracer as a simulation for my own purposes and also to show what I'm talking about. I'm not entirely certain why the IT manager has asked me to
default route
to Loopback 1, but he made it a mandatory objective for the job, and I'm not quite at the level to argue with him at the moment.
I'm currently using (please correct me if I'm wrong here):
Router0 (config)# ip route 0.0.0.0 0.0.0.0 209.165.201.97
%Invalid next hop address (it's this router)
Router0 (config)# ipv6 route ::/0 2001:db8:acad:3f::1
% Not allowed to point static routes through yourself
08-13-2023 12:02 AM - last edited on 08-14-2023 10:58 AM by Translator
@NorthNW try
#ip route 0.0.0.0 0.0.0.0 lo1
08-13-2023 02:11 PM
It looks like that worked out. Thank you for your help! I'll update if it doesn't end up working out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide